For the info window to function properly, the MKII cables are essential.
However, when switching to an RJ45 connection, a different cable is required.

RJ45 to Penta - Passive 0,20 cm

Avsolutions
Add to cart

Handmade special cable with RJ45 to din8-female.

Some beolab3000/4500/5000 and the beolab penta's have problems on a RJ45 connection of Bang & Olufsen.
Info window does not work, or the speakers do not want to switch on or off (beolink Passive).
This cable fits in all RJ45 Powerlink connections of B&O and is equipped with a din8 female to which existing din8 powerlink plugs can simply be plugged in.
This cable makes the beolab speakers with info window work again as well as switch off the beolink passive.
Cable is around 20 cm long, shielded and MKII cable (full-wired)


Beosound Core to Beolink Passive or Beolab Penta

Add to cart

Connect the BeoSound Core to the BeoLink Passive,

this is a special adapted cable, the Dinplug is soldered differently than the standard cable.
A standard RJ45 to Din8 has the disadvantage that it does NOT disable the passive or allow the info screen to work

This cable is also suitable for playmaker and essence to passive or beolab penta.

The cable makes the info window work again on the penta/3000/4500 and lab5000, instead of TP2 volume to be displayed and the input is visible again

If the BeoLab Pentas/3000/4500/5000 are looped through to each other, only 1 of this cable is needed.


Questions, mail us.

Powerlink Y cable Shielded

Avsolutions
Add to cart

Handmade powerlink Y cable specially intended for 5 mm shielded cables.
This Y-cable was specially made for me.

Performance,
1 X 8 x Wired Shielded DIN8 Male
2 X 8 x wired shielded DIN8 female
Cable length 50 cm.
Manufactured from Bosscom shielded cable 5mm.
For use in,

BeolabPenta/1/2/3/4/5/7/9/10/11/2500/3000,
4500/5000/6000/8000/8002/4002.


From,
Add to cart

This power link cable is extremely flexible and internally 8 x connected with wiring done and is double shielded (full-wired)

Cable thickness 5 mm MKII cable.

Intended for all BeoLab loudspeakers.


Plug and play cable. (Photo = cable)

Take the following into account, cables are never the specified lengths, there is always a difference of 10 to 25 cm, which is shorter, for example 9 meters is 8.75 m

For: Beolab Penta/1/2/3/4/5/7/9/10/11/2500/3000/4500/5000/6000/8000/8002/4002.


Suitable for, Beomaster 6500/7000-Beosound 4/5/9000/2500/3000/3200/Ouversture, Beocenter 2/2300, Beosystem 4500.

Factory = factory cable MKII Shielded

Hand = handmade cable MKII Shielded



More details