Connect Beosound, beomaster or ouverture with powerlink connection to the USB-C connection on the Beosound Theatre. (AUX-IN)

If you connect a music source beosound/center/master that has its own volume control,
set the volume of the music source to about 50% for normal operation from the Theater remote control.
If the connected center/master or the like displays a volume that is too low, e.g. volume 20,
then it may be too low to be reproduced in the theatre,
if the volume is set to 40 or 60, the theater will receive a correct signal.

USB-C audio input Adapter (minijack-Female) for the Beosound Theater,
Enables an analog audio input to the Beosound Theater.
It becomes possible to connect a Beogram record player or another external audio source via minijack.

To enable the Line input on the Theater open the B&O app.
select the Theater from the list of products and go to "Source List".
Choose "Line input" and set the input type to "Music".
Go back to "Sound settings" and enable "Auto Sense" for the line input with the sensitivity set to Medium.

Length adapter 13 cm.

Connect newer Android GSM/Tablet or Iphone's/Ipad's with USB-C to an Aux of the master/center/sound system.

The cable has a built-in Digital/Analogue converter (DAC) powered via USB-C.

This cable fits any BeoSound/Master/Center with DIN7 as an AUX connection.

On some equipment you can only connect an external device via a minijack connection.
With this cable, a record player with RIAA can be plugged into the Din7 and connected to external equipment via the minijack.

Cable length about 1 meter.

This cable fits a USB-C adapter that allows you to connect a turntable to a theater or Beosound A9 Gen4.

Connect the BeoSound Core to the BeoLink Passive,

this is a special adapted cable, the Dinplug is soldered differently than the standard cable.
A standard RJ45 to Din8 has the disadvantage that it does NOT disable the passive or allow the info screen to work

This cable is also suitable for playmaker and essence to passive or beolab penta.

The cable makes the info window work again on the penta/3000/4500 and lab5000, instead of TP2 volume to be displayed and the input is visible again

If the BeoLab Pentas/3000/4500/5000 are looped through to each other, only 1 of this cable is needed.

Questions, mail us.

The cable is intended to connect to a Power Link cable entry.

BeoPlay or from the playmaker

Cable for headphone output to amplifier or bluetooth to amplifier.
 
Can also connect Apple Airport to div. BANG & OLUFSEN components, or Audio-In tuner / TV

Or connection to Beosound4 to GSM / airport / TV

Cables are gold plated.
 
For,
BeoLab 1/4/3000/4000
beolab 4500/5000/6000
beolab 8000 and penta

Via (tulip) on LINE

Also for connection to the hall-bluetooth

Flex CAT7 cable to speed 10 gigabit.

Very high transmission speed.

8 thread netwerk kabel

Halogeen vrij

Double shieldedS/FTP

Paren in metal folie (PiMF)

Kabel diameter ca 6,2 mm

10/100/1000/10000 Base- T Ethernet

Vlam vertragend

2 X RJ45 Connectoren

Gold Plated verzegeld met strain relief.