Connect Beosound, beomaster or ouverture with powerlink connection to the USB-C connection on the Beosound Theatre. (AUX-IN)

If you connect a music source beosound/center/master that has its own volume control,
set the volume of the music source to about 50% for normal operation from the Theater remote control.
If the connected center/master or the like displays a volume that is too low, e.g. volume 20,
then it may be too low to be reproduced in the theatre,
if the volume is set to 40 or 60, the theater will receive a correct signal.

USB-C audio input Adapter (minijack-Female) for the Beosound Theater,
Enables an analog audio input to the Beosound Theater.
It becomes possible to connect a Beogram record player or another external audio source via minijack.

To enable the Line input on the Theater open the B&O app.
select the Theater from the list of products and go to "Source List".
Choose "Line input" and set the input type to "Music".
Go back to "Sound settings" and enable "Auto Sense" for the line input with the sensitivity set to Medium.

Length adapter 13 cm.

Connect newer Android GSM/Tablet or Iphone's/Ipad's with USB-C to an Aux of the master/center/sound system.

The cable has a built-in Digital/Analogue converter (DAC) powered via USB-C.

This cable fits any BeoSound/Master/Center with DIN7 as an AUX connection.

On some equipment you can only connect an external device via a minijack connection.
With this cable, a record player with RIAA can be plugged into the Din7 and connected to external equipment via the minijack.

Cable length about 1 meter.

This cable fits a USB-C adapter that allows you to connect a turntable to a theater or Beosound A9 Gen4.